LATHE MACHINE MANUFACTURE QUALITY MAINTAIN (SHEET THEORY) “ALPHA” LATHE MACHINE VS “NORMAL” (ROUTINE) LATHE MACHINE

Home / LATHE MACHINE MANUFACTURE QUALITY MAINTAIN (SHEET THEORY) “ALPHA” LATHE MACHINE VS “NORMAL” (ROUTINE) LATHE MACHINE

Compare Quality Maintain (Sheet Theory) = “ALPHA” Lathe Machine VS “NORMAL” (ROUTINE) Lathe Machine

Comparison & Different Between “ALPHA” Lathe Machine And “NORMAL – ROUTINE” Lathe Machine


PROCESS NO.	QUALITY MAINTAIN = SHEET THEORY	“ALPHA” Lathe Machine	“Normal – Routine” Lathe Machine
Process -1	We Take The Sheet At Bottom Of The Bed (From The Surface Plate) (TWO SHEET)	YES	NO
Process -2	We Take The Sheet At Above The Face Of The Leg (From The Surface Plate) (TWO SHEET)	YES	NO
Process -3	Then We Level The Two Legged Machine With A Horizontal And Vertical Level	YES	NO
Process -4	WE Take The Sheet Both Between Apron And Sadle. (From The Surface Plate) (TWO SHEET)	YES	NO
Process -5	We Take The Sheet At The Sedal Depending On The Bed.	YES	YES
Process -6	We Take The Sheet At The Bottom Of The Surface. (From The Surface Plate)	YES	NO
Process -7	We Take The Sheet Between The Sedal And Surface.	YES	YES
Process -8	We Take The Sheet At The Bottom Of The Compound. (From The Surface Plate)	YES	NO
Process -9	We Take The Sheet Between The Compound And Surface.	YES	NO
Process -10	After, We Take The Sheet On Compound Face. (From The Surface Plate)	YES	NO
Process -11	We Take The Sheet Between Compound Paw And Compound Face.	YES	YES
Process -12	We Take The Sheet At The Bottom Of The Tool Post.(From The Surface Plate)	YES	NO
Process -13	We Take The Sheet Between Compound And Toolpost Face.	YES	NO
Process -14	We Take Sheet At Bottom Of The Headstock. (From The Surface Plate)	YES	NO
Process -15	We Take The Sheet At The Bed Depending On The Headstock.	YES	YES
Process -16	We Take The Sheet Counter Breket. (From The Surface Plate)	YES	NO
Process -17	The Tailstock Patli Depending On The Bed.	YES	YES
Process -18	Above Tailstock Patli (From The Surface Plate)	YES	NO
Process -19	Spindle Ring Gear And Kala Sheet (From The Surface Plate) (Two Sheet)	YES	NO
Process -20	“Bottom Of Tailstock (From The Surface Plate)	YES	NO


PROCESS NO.	QUALITY MAINTAIN = SHEET THEORY	“ALPHA” Lathe Machine	“Normal – Routine” Lathe Machine
Process -1	We Take The Sheet At Bottom Of The Bed (From The Surface Plate) (TWO SHEET)	YES	NO
Process -2	We Take The Sheet At Above The Face Of The Leg (From The Surface Plate) (TWO SHEET)	YES	NO
Process -3	Then We Level The Two Legged Machine With A Horizontal And Vertical Level	YES	NO
Process -4	WE Take The Sheet Both Between Apron And Sadle. (From The Surface Plate) (TWO SHEET)	YES	YES
Process -5	We Take The Sheet At The Sedal Depending On The Bed.	YES	NO
Process -6	We Take The Sheet At The Bottom Of The Surface. (From The Surface Plate)	YES	NO
Process -7	We Take The Sheet Between The Sedal And Surface.	YES	YES
Process -8	We Take The Sheet At The Bottom Of The Compound. (From The Surface Plate)	YES	NO
Process -9	We Take The Sheet Between The Compound And Surface.	YES	NO
Process -10	After, We Take The Sheet On Compound Face. (From The Surface Plate)	YES	NO
Process -11	We Take The Sheet Between Compound Paw And Compound Face.	YES	YES
Process -12	We Take The Sheet At The Bottom Of The Tool Post.(From The Surface Plate)	YES	NO
Process -13	We Take The Sheet Between Compound And Toolpost Face.	YES	NO
Process -14	We Take Sheet At Bottom Of The Headstock. (From The Surface Plate)	YES	NO
Process -15	We Take The Sheet At The Bed Depending On The Headstock.	YES	YES
Process -16	We Take The Sheet Counter Breket. (From The Surface Plate)	YES	NO
Process -17	The Tailstock Patli Depending On The Bed.	YES	YES
Process -18	Above Tailstock Patli (From The Surface Plate)	YES	NO
Process -19	Spindle Ring Gear And Kala Sheet (From The Surface Plate) (Two Sheet)	YES	NO
Process -20	“Bottom Of Tailstock (From The Surface Plate)	YES	NO

[21]. “Bottom Of Tailstock (From The Surface Plate)[Alpha No.0311,0321,0331,0401,0431,0511,0521,0611,0621] — YES(“ALPHA” LATHE MACHINE ) —-NO(“NORMAL”LATHE MACHINE )

-: Total Sheet :-

“ALPHA” LATHE MACHINE = 24

“NORMAL” LATHE MACHINE = 5 To 7,8

NOTE :- WE DO ALL THIS “ALPHA” LATHE MACHINE MANUFACTURE QUALITY MAINTAIN BY OUR SPECIAL METHODE

NOTE :- WE TAKE THE SHEET OF (“ALPHA” LATHE MACHINE) ALPHA NO. 0111,0121,0201,0311,0321,0331,0401,0431,0511,0521,0611,0621.

NOTE :- You have to check and take the “NORMAL” lathe machine.