Description

ALPHA LATHE MACHINE RAJKOT

(SUPER SIDE PRODUCTION)

 

Our Goal = To Make The Alpha Machine Better = For = Is Nearly All Dimensions.(Specification)

BED LENGTH	1350mm
BED WIDTH	279mm
BED	Flame Hardened Bed Ways
CENTER HEIGHT	215MM
HEADSTOCK	SQUARE
SPINDLE BORE	50mm (NITRETING & REGRINING)
BED	HEAVY V
BED SEDAL V	37mm
BED TAILSTOCK V	31mm
TAILSTOCK	MEDIUM HEAVY
TAILSTOCK RAM DIAMETER	57mm (EN8 Harden & Regrining)
SURFACE WIDTH	175mm
COMPOUND WIDTH	100mm
TOOLPOST WIDTH	100/100mm
COUNTER	MEDIUM HEAVY
COUNTER BREKET	MEDIUM HEAVY
COUNTER PEDISON	MEDIUM HEAVY
AARAPULLY DIAMETER	300MM
CHUCK PLATE	250mm
RAM LOCK BUSH	GUNMETAL
DOUBLE GEAR	HELICAL GEAR 29 TO 31MM THICKNESS
CHANGE GEAR	19MM THICKNESS
LIDING SCREW	DOUBLE BEARING & CHUCK NUT & 37MM DIAMETER
TAILSTOCK BOSS DOUBLE BEARING	YES
SEDAL BOSS DOUBLE BEARING	YES
APRON BOSS & PENIUN BEARING	YES
INDICATOR	HEAVY
DIS BORDER	100mm
PUNJO	HEAVY
ABC	495mm

 

We are engaged in offering a wide range of most recent technologies based 4.5 FEET SUPER HEAVY MEDIUM DUTY LATHE MACHINE ALPHA LATHE RAJKOT (SUPER SIDE PRODUCTION) ALPHA NO.-0321  to our clients. Our 4.5 FEET SUPER HEAVY MEDIUM DUTY LATHE MACHINE intended to make industrial tasks easier, faster and error free.

4.5 FEET SUPER HEAVY MEDIUM DUTY LATHE MACHINE inspected against various quality parameters by our quality controllers.

OUR SPECIALTY

• The Bed Is Rough And Harden And We Keep 30 Days To 6 MonthsAnd 1 Year , After Bed Grining We Keep Some Time, After Bed Finishing And Finishing Grining (Only Our Way)
• The Headstock Is Rough And Boring Rough We Keep 15 Days To 120 Days, After Finishing Boring By Taking A Seat At Bottom Of The Headstock (Only Our Way)
• THe Sedal , Surface And Compound Is Rough And We Keep 30 Days To 60 Days , After Sedal , Surface And Compound Finishing And Boring (Only Our Way)
• Spindal Pully With Gear , Counter Pully With Shaft And Aarapully Belenshing Our System. (Only Our Way)

 

(1) Seat At The Bottom Of The Bed And Face Of The Leg At The Top (From The Surface Plate) (Only Our Way)

(2) Seat At The Bottom Of The Headstock (From The Surface Plate) (Only Our Way)

(3) Then Cross-Leval Our Way Of Working Into A Two Leg Machine (Only Our Way)

(4) Then Take A Seat From Bed To Headstock , Sedal And Tailstock (Only Our Way)

(5) Seat In Bed From Headstock (Only Our Way)

(6) Wear Apron And Sedal Seat There (From The Surface Plate) (Only Our Way)  

(7) Sedal Seat (From The Bed) (Only Our Way)

(8) The Bottom Seat Of The Surface (From The Surface Plate) (Only Our Way)

(9) Seat Between The Sedal Surface (Only Our Way)

(10) Seat The Bottom Of The Compouund (From The Surface Plate) (Only Our Way)

(11) Seat Between The Surface Compound (Only Our Way)

(12) After Compound Face Seat (From The Surface Plate) (Only Our Way)

(13) Seat Between Compound Paw And Compound Face (Only Our Way)

(14) Seat Bottom Of The Toolpost (From The Surface Plate) (Only Our Way)

(15) Seat Between Compound And Toolpost Face (Only Our Way)

(16) Seat Bottom Of Tailstock (From The Surface Plate) (Alpha No.- 0111,0121,0201,0311,0321,0401,0511,0521,0611,0621) (Only Our Way)

(17) Seat In The Tailstock Patli (From The Surface Plate) Our System (Alpha No.- 0111,0121,0201,0311,0321,0401,0511,0521,0611,0621) (Only Our Way)

(18) We Have Done The Final Boring Of The Tailstock On A Machine (Only Our Way)

(19) After The Final Fitting Of The Machine We Do The Final Testing Our Way. (Only Our Way)

 

STANDARD ACCESSORIES

• Change Gear Set Heavy
• Chuck Back Plate 10″ Inch Heavy
• Spindle Sleeve
• Dead Centre-2nos.
• Tool Post Key
• Motor Pulley

 

OPTIONAL ACCESSORIES

• 10″ Inch Center Height
• 75mm Spindle Bore
• Face Plate
• Steady Rest
• Follow Rest
• Water Guard
• Dog & True Chuck
• Electric Motor
• Coolant assembley
• Norton Gear Box
• Tapper Turning Attachment
• Rear Tool-Post